Highlights:
- 4 Port Industrial Gigabit POE Injektor in widerstandsfähigem Gehäuse
- 4 x 60W Giga TX PSE (802.3af/at POE+) + 2×100/1000M SFP-Slots
- 48-56V DC redundante Stromversorgung
- Erweiterte Betriebstemperatur: -40°C bis +75°C
Dieser High Power Industrial Gigabit Switch verfügt über vier 60W Gigabit PSE Ports und stellt so bis zu 60 Watt PD für Outdoor Kameras, Beleuchtung oder andere High Power PD Geräte zur Verfügung. Es können Eingangsspannungen von 48 bis 56V DC angebunden werden, die besonders bei IP Videoüberwachung, Verkehrsüberwachung oder vielen weiteren Anwendungen benötigt werden. Es kann als Stand-Alone Gerät oder kaskadiert mit weiteren Geräten über SFP angebunden werden.
Technische Daten:
IEEE Standard | IEEE 802.3 10Base-T Ethernet |
Switch Architecture | Back-plane (Switching Fabric): 12Gbps |
Data Processing | Store and Forward |
Flow Control: | IEEE 802.3x Flow Control and Back Pressure |
Jumbo Frame | 9KB |
MAC address Table Size | 1K |
Packet Buffer Size | 1M |
Network Connector: | 4xRJ-45 10/100/1000BaseT(X) auto negotiation, |
Network Cable | UTP/STP Cat.5e or above Cable |
EIA/TIA-568 10-ohm (100m) | |
Protocol | CSMA/CD |
LED | PW1(Power 1) Green, |
TX/RJ-45 port: | |
SFP Fiber Per port: | |
DIP Switch | DIP 1: OFF: Port 5 SFP ON(DEFAULT) |
Reserve polarity protection | Present |
Overload current protection | Present |
Power Supply | Redundant Dual DC 48V-56V Power Input |
Power Consumption | 5.76W@48 VDC full load, Without POE |
Alarm Relay Contact | Relay outputs with current carrying capacity of 1 A @24VDC, |
POE power | POE power per port 60watts. Maximum total power 240Watts. Supports IEEE802.3af/at |
Removable Terminal Block | Provide 2 Redundant power, Alarm relay contact ,6 Pin |
Operating Temperature | -40?~75? fully tested. |
Operating Humidity | 5% to 95% (Non-condensing) |
Storage Temperature | -40?~85? |
MTBF (mean time between failure) | 510,304 hrs ( MIL-HDBK-217F) at 25°C |
Housing | Rugged Metal ,IP30 Protection |
Case Dimension (L x W x D) | 142mmx43mmx105mm (LxWxD) |
Installation mounting | DIN Rail mounting and Wall Mounting |
Certifications: | |
EN55022/24 | ITE equipment |
EN55011 | Industrial, Scientific and Medical (ISM) equipment |
Safety | IEC EN60950-1 |
EMC/EMS | CE, FCC, VCCI |
EMI | FCC Part 15 Subpart B Class A, |
EN 50155 / EN 60068-2-6 | Vibration |
EN 50155 / EN 60068-2-27 | Shock |
EN 50155 / EN 60068-2-32 | Free Fall |